ARC140/S350-CL Arc Spray System


ARC140/S350-CL Arc spray

The Metallisation ARC140/S350-CL twin wire arc spray system is a unique blend of ability and innovation. This utilizes the ARC140 pistol and drive system plus the sealed, switched voltage S350 Energiser and added Closed Loop current control. This enables the operator to set the spray current independent of wire type before starting the job, enabling easier setup and protection of the system from over-current.

The control function is now controlled by a simple PLC which ensures improved reliability as less component parts are required. It also makes fault finding simple using a standard multimeter with the I/O for the PLC. The S350CL energiser features sealed electronics for excellent reliability in the harshest of spray environments.

The design also allows for multiple customer-specific packaging options for the wire drive and dispense. In one option, for example, the unit is neatly mounted on the energiser, leaving it free to swivel and follow the operator when spraying. Other options include floor or trolley mounting of the wire drive unit. There is no motor in the pistol. Instead, the ARC140/S350-CL uses the Metallisation patented ‘Synchrodrive’ system, where a single, sealed motor and flexible drive arrangement, powers a reliable, positive drive push/pull up to a length of 66 ft (20m). This results in a long reach and lightweight flexibility of the pistol and supplies – and more comfortable and productive working conditions for the operator.

Further supplies pack extensions with remote dispensing can be added to enable the energiser to be positioned up to 60m away from the spray site, making the system ideal for remote spraying applications like flare booms, boilers etc.

Applications:

  • Structural steelwork
  • Offshore oil and gas
  • Shipbuilding and marine
  • Bridges (concrete and steel)
  • Vessels and enclosures
  • Wind turbine towers
  • Fences and gates
  • Engineering bond coats
  • Wear coatings
  • Bearing and seal surfaces

Features:

  • New S350-CL sealed energiser
  • Closed-loop current
  • Uses wires from 1/16" to 3/32" (1.6mm to 2.5mm)
  • Lightweight air cooled cables
  • Excellent pistol manoeuvrability
  • Up to 66 ft (20m) supplies package
  • Anti-corrosion and engineering coatings
  • Easy to maintain = lower downtime
  • 5m pull option available for small workshops
  • MIG, coil and drum dispense
  • Soft start for smooth start ups
  • PTFE lined conduits
TMS Metalizing Systems is "The Right Choice"TM  in Thermal Spray Equipment!