Arc Spray Systems
In the arc spray process, the raw
material in the form of a pair of metallic wires, is melted by an electric arc.
This molten material is atomised by a cone of compressed air and propelled
towards the workpiece. The molten spray solidifies on the component surface to
form a dense, strongly adherent coating suitable for Corrosion Protection or
component Reclamation. Sprayed coatings may also be used to provide Wear
Resistance, Electrical & Thermal Conductivity or Free Standing Shapes.
Major advantages of the arc spray
process are that the coatings are available for almost instant use with no
drying or curing times and there is no risk of damaging the component. In
addition, the deposits possess a higher degree of bond strength than most other
thermally sprayed deposits and the use of compressed air and electricity alone
mean more economic coatings.
- Designed for shop or field.
- Big Wire Capabilities
- Aluminum, Zinc, and Zinc/Aluminum wires, 3/16" in diameter, are routinely sprayed.
- Can easily be adapted to 1/8" - 1/16" wires.
Hard wires up to 3/32".
- Designed for small shop applications or field touch up
on large projects.
- Aluminum or Zinc wires up to 3/32" and 1/16" hard wires.
- Single phase or three phase power.
- Flexible drive for lightweight pistol
- Pull system, 16 ft supplies package, 1/16" (1.6mm) and 2.0mm wires
- 250 amp energizers
- Designed for engineering applications
- Flexible drive for lightweight, hand held pistol
- Electric Synchrodrive push/pull - up to 66 ft supplies package,
1/16" - 3/32" wires
- 250, 350, and 450 amp energizers
- Anti-corrosion and engineering versions
-
The fastest hand-held system available
- Self-aligning pistol head maintains repeatable coating quality
- Flexible operation - easy to maneuver on-site or in the workshop
- Electric Synchrodrive push/pull - up to 33 ft supplies package, 1/8" - 3/16" wires
- 700 amp (100% duty cycle!) energizer
- Anti-corrosion applications
- Electric motor pull drive system
- 16 -33 ft supplies package, 1/16"-1/8" wires
- Machine mounted pistol
- 250, 300, 450, and 1000 amp energizers
- Engineering and anti-corrosion applications
- Simple to operate and user friendly
- Lightweight pistol which reduces operator fatigue
- Closed arc system reduces operator glare
- Self-aligning pistol head maintains repeatable coating quality
- Flexible operation - easy to maneuver on-site or in the workshop
- Anti-corrosion sizes up to 1/8"
